Blackout Curtains for Darkroom
video

Blackout Curtains for Darkroom

Products name:LSFH2416
Composition:100% Polyester
Width: 280/cm-300/cm
Weight: 390g
Send Inquiry
Product Introduction
 

Double-Side Composite Blackout Coating Fabric - Darkroom Grade

 

Blackout Curtains for Darkroom

Fabric roll for darkroom curtains, projection rooms, and light-sensitive production spaces. Not finished curtains.

This fabric carries a blackout coating on both faces of a 100% polyester base cloth. The double-side build addresses a specific problem in darkroom work: light that passes through a single coating layer at pinholes, fold creases, or stitch lines. With coating applied to both surfaces, the opaque barrier sits on either side of the base cloth, and the face that turns toward the room can be finished in white or a light tone without exposing an uncoated reverse. The roll is supplied at 280–300 cm usable width and 390 g/m², so darkroom drape panels can be cut with fewer vertical seams.

 

 

Specifications

 

Item Specification
Product Code LSFH2416
Composition 100% Polyester
Fabric Structure Fabric with Foam / Acrylic Coating
Width 280–300 cm
Weight 390 g/m²*
Light Blocking Rate 100% (as specified for this model)
Coating Type Foam Coating / Acrylic Coating
Flame Retardancy NFPA 701 or customized requirements
Customization OEM / ODM

 

 

 

OEM / ODM Order Process

Requirement Review

Submit the required material, width, coating, light-blocking rate, flame-retardant standard and estimated quantity.

Quotation

Lishun provides a preliminary production proposal and quotation, normally within one working day after receiving sufficient specifications.

Sample Production

Samples can be arranged after the construction and requirements are confirmed. The usual sample preparation period is 3–5 days.

Sample Approval

Buyers check the fabric color, surface, hand feel and required performance.

Bulk Production

Production is arranged according to the approved sample and confirmed order specifications.

Inspection and Shipment

Finished fabric is inspected before shipment. FOB is the main trading term, with sea freight as the usual shipping method.

For a quotation, please provide the target fabric width, required coating structure, light-blocking rate, flame-retardant standard and estimated order quantity.

 

Blackout Curtains for Darkroom

 

Product Parameter

 

Products name LSFH2416

Product style

customized

Product raw material

fabric+foamcoating/arcylic

Shading rate

100%

Flame retardant

NFPA701or customized

Color

arcylic (can not be dark col)

Application

Double Side Composite Blackout Coating Fabric

OEM&ODM

ACCEPT

Blackout Curtains for Darkroom

 

Coating Build and Pinhole Control

 

The coating line runs a multi-pass sequence. A white acrylic foam layer is applied first, followed by an opaque black membrane, then a second white or tinted face coat. This three-layer sequence - white / black / white - places the light-blocking membrane in the middle of the coating stack rather than on the surface. The outer white layers protect the black membrane from abrasion and folding stress, and they keep the face and back of the fabric visually consistent when both sides are exposed in a darkroom installation. Coating viscosity is checked at the start and during long production runs; batch-to-batch variation in coating weight shows up as pinholes or uneven light transmission, so the line records viscosity and coating weight at fixed intervals.

Blackout Curtains for Darkroom
Blackout Curtains for Darkroom

Double-side coating does not eliminate the need for seam planning. Stitch holes are a mechanical perforation, not a coating defect. For darkroom panels, specify overlap or blackout-lined seams at the heading and side hems; the fabric itself tests to full blockage across the field, but the assembly is where light leaks are most often found.

Description of Test Items for Rolled Materials

 

Coating adhesion is measured by cross-cut tape test, not by hand feel. The 5B result means no coating squares detached from the base cloth at the cut edges. The rub test extends this to 500 cycles without peel, which matters for darkroom curtains that are opened and closed daily and folded against themselves at the stack.

Blackout Curtains for Darkroom
 

 

Light-blocking performance is reported against EN 14501, the European performance classification for window coverings. The 0.0005 lux leakage figure is from the same double-composite coating platform and represents the coating's field performance before seam or edge detailing. Buyers who require AATCC 203 data for a specific destination market can request the test on the ordered shade; the result is shade-dependent because lighter face colors transmit more light at the same coating weight.

Temperature cycling from −20 °C to 60 °C is tested for coating cracking and hardening. Darkrooms in unheated studios or transport containers see both ends of that range; the coating is formulated to stay flexible rather than embrittle.

Blackout Curtains for Darkroom
Blackout Curtains for Darkroom
Blackout Curtains for Darkroom
Blackout Curtains for Darkroom

 

Blackout Curtains for Darkroom

 

Full Shading

 

Full Shading

Semi-Shading

 

Semi-Shading

Tough Material, Can't be Torn!

 

Tough Material, Can't be Torn!

Customization Boundaries

 

Width is the first specification to lock. 280 cm and 300 cm are standard roll widths; wider requests move into the 320 cm range on the same coating line but require a minimum run length. Weight can be adjusted by coating pickup, but the 390 g/m² build is the reference point for the drape and opacity combination. Reducing weight below that changes the hand and increases pinhole risk; increasing weight adds body but reduces yardage per roll.

 

Face color is constrained by the coating chemistry. White, off-white, and light neutral shades run on the standard white-foam / black-membrane / white-face sequence. Dark face colors require a different pigment loading and are quoted separately. Fire retardancy is available as a post-treatment or built into the coating formulation; CAL 117 Class 1 is the reference certification on this route, and NFPA 701 can be reviewed against a target order.

 

MOQ follows color and width: stock white and off-white at 280 cm run from 600–800 meters per color; custom shades and non-standard widths are quoted on a per-order basis with sample approval before bulk.

LISHUN

Factory Address:
Yunhebei Industrial District, Dama Town, Tongxiang City, Jiaxing City, Zhejiang Province.

 


 

R&D Capacity
OEM, ODM

 


 

R&D Staff
5-10 People

 


 

Production Lines
Above

 


 

Annual Output Value
US$5 Million - US$10 Million

Factory

 

Factory Showcase

 

Production Process

 

 

 

FAQ

 

Q: Does double-side coating replace the need for a separate blackout lining in a darkroom?

A: The fabric reaches full blockage on its own. A separate lining is not required for light control inside the field of the fabric. The reason to use a lining in a darkroom build is to protect the coated face from abrasion at the floor and stack, or to add a different face texture on the room side. The coating itself is the light barrier.

Q: How do we verify pinhole-free performance before bulk?

A: Request a sample from the production shade and test it over a light box in a darkened room, not just with a handheld flashlight. Pinholes appear as bright points when the sample is backlit at close range. The sample should come from the same coating run as the bulk order; shade changes can shift coating pickup and pinhole behavior. The roll label should carry the coating run number and shade lot, so the sample and bulk are traceable to the same line conditions.

Q: Can the white face be oriented toward the room in a darkroom?

A: Yes. The double-side build allows either face to be exposed. The white acrylic face is the side typically oriented toward the room in darkrooms where a light-toned interior is preferred; the black membrane remains encapsulated between the face layers. The reverse can also be finished in white or a light tint, subject to the same coating compatibility review as the face.

Q: What is the maximum panel height before seam light leak becomes a concern?

A: Seam light leak is an assembly issue, not a fabric width issue. A 280 cm or 300 cm roll covers most darkroom window heights without a horizontal seam. When a seam is required, the joint should be overlapped and stitched with a blackout-rated thread, then tested under the same backlight conditions as the field fabric. The coating does not seal stitch holes.

Q: What data can be supplied with a bulk order for project submittals?

A: Coating adhesion (ASTM D3359), light-blocking classification (EN 14501), temperature cycling, and the optional fire certificate (CAL 117 or NFPA 701) are available as batch-linked test reports. Shade-lot records and coating run numbers are kept against the roll label. For projects requiring AATCC 203 instead of EN 14501, state the test method in the RFQ so the sample is submitted on the correct route.

 

Get a Quote

Hot Tags: blackout curtains for darkroom, China blackout curtains for darkroom manufacturers, suppliers, factory, Blackout Curtain Fabric for Living Room, Outdoor Blackout Fabric, 100 Blackout Fabric, double side composite blackout coating fabric, Blackout Fabric Blinds for Windows, 100 Polyester Blackout Fabric

Send Inquiry

whatsapp

Phone

E-mail

Inquiry