Fiberglass PVC Roller Blinds Fabric
video

Fiberglass PVC Roller Blinds Fabric

Products name: LS202410
Composition: 100% Polyester
Width: 200/cm-250/cm
Weight: 320GSM
Send Inquiry
Product Introduction
 

Fiberglass PVC Roller Blind Fabric

Fiberglass PVC Roller Blinds Fabric
Fiberglass PVC Roller Blinds Fabric
Fiberglass PVC Roller Blinds Fabric
Fiberglass PVC Roller Blinds Fabric

Fiberglass PVC Roller Blinds Fabric is a fiberglass and PVC composite roller blind fabric. It uses fiberglass cloth as a base material and is coated with a PVC layer. The warp count is 600 threads per 10cm and the weft count is 200 threads per 10cm. It is tough and stretch-resistant. It offers a shading rate of 90%-95%, A1-level non-flammability (the highest fire rating), IPX6-level water resistance, acid and alkali corrosion resistance, and stable performance in temperatures ranging from -30°C to 80°C. It is suitable for specialized environments such as kitchens, laboratories, and industrial workshops. As a professional manufacturer, LISHUN offers this fabric in various thicknesses to meet the needs of overseas companies seeking high-performance roller blind fabric.

 

 

 

At a glance

 

Item Typical range Confirmed on order
Composition Fiberglass base cloth + PVC coating Resin ratio and coating formulation
Base cloth Warp 600 / weft 200 threads per 10 cm Greige lot inspection report
Weight 440–560 gsm Per coating weight ordered
Thickness 0.38–0.55 mm Per coating weight ordered
Width 1.5–3.2 m Above 3.2 m subject to capacity review
Roll length 30–50 m Per order
Light blocking 90%–95% standard Up to 100% as a specified option
Fire-retardant options NFPA 701 / BS 5867-2 / EN 13773 Standard, classification and report scope confirmed per order
Water resistance IPX6-rated coating available Per coating selection
Temperature range -30°C to 80°C Per formulation
Color To sample / Pantone reference Dark shades subject to coating review
Packing Paper tube, roll wrapped Pallet or loose loading per shipment

 

 

Product Features

Fiberglass PVC Roller Blinds Fabric

High-Strength Fiberglass

The fabric is reinforced with fiberglass for strength and durability, offering exceptional stretch resistance and long-lasting durability.

Fiberglass PVC Roller Blinds Fabric

Waterproof PVC Coating

The surface coating is water-resistant, ensuring optimal performance even in wet environments and easy cleaning.

Fiberglass PVC Roller Blinds Fabric

Excellent Sunshade

Effectively blocks sunlight and UV rays, reducing heat transfer and providing a comfortable indoor environment.

Fiberglass PVC Roller Blinds Fabric

Fireproof

Complies with international fire protection standards, offering excellent fire resistance and providing added safety for homes and businesses.

Fiberglass PVC Roller Blinds Fabric

UV Resistant

The coating is specially treated to block over 98% of UV rays, preventing furniture from fading and preventing overheating.

Fiberglass PVC Roller Blinds Fabric

Eco-Friendly Materials

Made of environmentally friendly PVC and compliant with EU ROHS standards, it is suitable for use in various environments and protects user health.

Fiberglass PVC Roller Blinds Fabric

 

Product Parameter

 

Products name LS202410

Product style

customized

Product raw material

fabric+foamcoating/arcylic

Shading rate

100%

Flame retardant

NFPA701or customized

Color

arcylic (can not be dark col)

Application

Roller Blind Fabric

OEM&ODM

ACCEPT

 

Fiberglass PVC Roller Blinds Fabric

 

Scope and Limitations of Customization


Width runs from 1.5 m to 3.2 m. A 3.2 m roll covers most commercial window bays without a horizontal seam. Anything above 3.2 m needs a capacity check before quotation - the coating line and winding equipment, not the base cloth, set that ceiling.

 

Light blocking is specified in three bands: 50%–60%, 70%–80%, and 80%–100%. This fabric is normally ordered in the 90%–95% range; full blackout to 100% is available as a specified option and should be confirmed by a physical sample before bulk. Color is matched to your sample or a Pantone reference. Dark shades are possible but require a coating trial, because heavy pigment loading can affect film adhesion and shade continuity across the roll.

Fiberglass PVC Roller Blinds Fabric
Fiberglass PVC Roller Blinds Fabric

Fire-retardant performance is quoted against the destination market. NFPA 701, BS 5867-2 and EN 13773 are separate standards with different test methods and classifications; one report does not substitute for another. Tell us the market and the project specification, and we will confirm which standard applies, what classification the construction achieves, and what documentation can be issued with the lot.

OEM and ODM


OEM: you provide the material, coating, width, light-blocking and fire-standard requirements; we produce to that specification, inspect against it, and pack under your shipping marks after confirmation.

 

ODM: we propose an existing construction - for example, a 440 gsm fiberglass-PVC blackout with NFPA 701 - and you adjust color, width or roll length within the boundaries above. This route is faster because the coating formulation and line settings are already validated.

Fiberglass PVC Roller Blinds Fabric
 

 

Fiberglass PVC Roller Blinds Fabric

 

Full Shading

 

Full Shading

Semi-Shading

 

Semi-Shading

Tough Material, Can't be Torn!

 

Tough Material, Can't be Torn!

Base cloth and coating

 

The base cloth is woven fiberglass, not polyester. That choice matters when a blind runs wider than 2.5 m: fiberglass holds its width under tension and does not sag the way a thermoplastic base cloth can. We inspect incoming greige for warp/weft count, broken ends and loom marks before it reaches the coating line.

 

PVC is applied in a controlled film, then cured. Coating weight is checked against the approved order specification at the line, not only on the finished roll. The same line runs foam, flocked and silicone treatments; TPU coating is available where the end use calls for a tougher waterproof film. We also coat customer-supplied base cloth after substrate review, which is covered in the FAQ below.

LISHUN

Factory Address:
Yunhebei Industrial District, Dama Town, Tongxiang City, Jiaxing City, Zhejiang Province.

 


 

R&D Capacity
OEM, ODM

 


 

R&D Staff
5-10 People

 


 

Production Lines
Above

 


 

Annual Output Value
US$5 Million - US$10 Million

Factory

 

Factory Showcase

 

Production Process

 

 

 

FAQ

 

Q: What is the MOQ, and can we run a trial order before committing to bulk?

A: MOQ depends on width, coating and color, because the line setup changes with each combination. Trial quantities are reviewed case by case; the sample lead time is 3–5 days after specifications and lab dip are confirmed. Bulk runs follow at 45–60 days, or 15–45 days for repeat/ODM constructions.

Q: Which fire test reports can you supply for this fabric?

A: We quote fire-retardant options against NFPA 701, BS 5867-2 and EN 13773. The report must match the exact construction, coating weight and intended application - a report issued for a different gsm or coating does not cover your order. Tell us the destination market and the project specification before we quote, and we will confirm the applicable standard, classification and document scope.

Q: Can you coat fiberglass base cloth that we supply?

A: Yes, subject to substrate review. We check weave, warp/weft count, sizing and moisture before running customer-supplied greige. If the base cloth is outside the line's tension or width window, we will say so before quoting rather than run it and sort out the defects afterward.

Q: What is the maximum width, and what changes above 3.2 m?

A: Standard production covers 1.5–3.2 m. Above 3.2 m requires a capacity review; the constraint is coating line and winding capability, not the fiberglass cloth itself. For projects that need a wider drop, tell us the finished blind width and quantity, and we will confirm whether the line can run it or whether a different construction should be quoted.

Q: How do you control shade continuity between rolls and between lots?

A: A lab dip is approved before production. The coating line is monitored against that approved shade, and finished rolls are checked under the same light source used for approval. Retention samples are kept from each lot. If your project requires batching from a single lot, state that at order stage so production can be scheduled accordingly.

 

GET QUOTE

 

Hot Tags: Fiberglass PVC Roller Blinds Fabric, China Fiberglass PVC Roller Blinds Fabric manufacturers, suppliers, factory, roller blind fabric, Jacquard Weave White Coating, Roller Blind Sun Protection Fabrics, 21 21 Polyester Transmitting, 100 Polyester Roller Blinds Fabrics, 600 600oxford White Coating

Send Inquiry

whatsapp

Phone

E-mail

Inquiry